|| posted on 1-10-2017 at 02:23
Good questions in both your posts, but the bottom line is a roll of the dice unless you know someone who has tried one of the methods you described
(and you also would have to know fairly precisely just how often they use their inkjet printer re a drying out problem--some of the hits recommended
doing AT A MINIMUM at least one page per week printout--AND some recommended 3-4 pages as being worth the cost of the used ink versus having to buy a
One of things I noticed and it might reflect how infrequently I update myself on cartridges, is that their are now high capacity cartridges for most
major brands. I did NOT research whether high capacity has different tech versus standard size--obviously high capacity is much more expensive and
you would take a big hit financially if it dried out and became inoperable.
|| posted on 1-10-2017 at 02:00
|I understand Epson makes some printers that have an estimated two-year supply of ink that comes in or with the printer when you buy it. The ink
reservoir refills, but the printer cartridge does not need to be replaced.
Has anyone tried this?
|| posted on 1-10-2017 at 01:58
|I used to refill the ink on my cartridges, myself, from the kind of kit that had an injector (it looked like a medical syringe). I could do black ink
into a black ink cartridge, or I could do each color into the sections of a multi-section cartridge. I did this quite a bit for Canon cartridges.
For nozzle clogs, I used a cotton swab (in the US, they are called Qtips) and alcohol.
But, my last several printers have been HP. Perhaps three printers ago, instructions told me that the ink inside the cartridge was pressurized in
some way, and I could not inject and get good results as I had, before.
I have now realized that I never checked to see if my HP printers after that also had the pressure function, which defeats my refill method, or if
that was abandoned in favor of the older, simpler engineering. Perhaps someone here knows? I haven't seen the refill-it-yourself kits around lately
(but, I haven't sought them out).
|| posted on 1-10-2017 at 01:41
Besides the Google search stuff for website hits, uTube has numerous vids on all aspects. The ones I viewed, while the uploader was certainly not
some malicious person, did not do what I would consider/call a longitudinal experiment, i. e., do what they were recommending in the vid, and say,
come back months later, and show how well their "recommendations" worked in the real world via a printout (a before and after type vid). So if you
followed any vid's recommendations, you were in a blind faith mode, not to mention have no capability to compare one vid's method, versus another re
There are also blocked nozzles fixes mixed in among the uTube hits, but you also have to find the "recommended" fix for your particular model
cartridge type; some vids were "professional" enough to spell out that their particular vid was only applicable to one type of cartridge as opposed
to some that were a 'one size fits all' fix. The fixes can actually work as evidenced by my effort in this area with my very old HP 1120C, to
include a limited amount of rejuvenation when I was getting 'low ink' messages. Bottom line: you can spend a good deal of time "researching" that
might turn out to be a waste of time re obtaining worthwhile results.
|| posted on 1-10-2017 at 01:05
|The problem with inkjets is not so much the ink drying out in the cartridge but ink drying out in the nozzles. So, unless you can store the entire
printer in the 'fridge, I think you will be wasting your time. FWIW, I, too have several inkjets, all of whom have blocked nozzles.
|| posted on 30-9-2017 at 19:48
|My Go To computer repair person had an exceptionally great deal on a USED combo scanner printer ($30) [and he delivered it to my house]. You can't
have too many spare/backup printers, now can you (this makes No 5)?
The only drawback is that it uses inkjet cartridges. And this hardware will be 'hanging around unused' for long periods of time.
My other spare (and ancient) color inkjet printer has always had major issues with its cartridges drying up [due to not being used], and all that goes
with that when I do want to use it.
So I came up with this possible idea of removing the cartridges between uses, and storing them in the frig in one of those sealable plastic bags. I
searched Google for that, and I might as well have asked Google to tell me the meaning of life--there were lots of hits with all kind of if, ands, and
buts. [by the way if that is ever done, the consensus was to wait till the cartridge(s) were at ambient room temp before using them--sounds likethat's a good plan].
So I'm posting this topic to ask if anyone on this board has actually tried storing their inkjet cartridges in the fridge and whether that worked