|| posted on 28-12-2016 at 01:27
Another "funny" from yours truly: I must watched at least a half-dozen YouTube vids (in their entirety) this afternoon on this subject. I came
away with the negative view that I was biting off more than I can chew for the sake of a minor convenience during boot up to include making a real
mess of things if I make just *ONE* mistake during the process.
Seriously, though, the biggest problem for "us" home amateur users is NOT ONLY do we *NOT* always realize during the process that we're making a
mistake that will result in disastrous consequences, but there's no "reset" button to undue the damage. If it wasn't for the dog days of winter,
I would never take on such projects re the possibility of having to start all over again.
Anyway thanks for the help.
|| posted on 28-12-2016 at 01:06
|Of course, I'm sure you've already read this which gives a pretty good run down on dual booting various options.
|| posted on 27-12-2016 at 17:17
|FYI for all you hardcore techies: my update re the technical details of installing multiple HDs on one desktop PC; each HD has a stand alone OS with
either some Win OS version or a Linux distro. None of the HDs have a partition on them.
On bootup during the POST process (Power On Self Test), tapping the F8 key gives me the screen which I have embedded an image of in this post (image
taken with a camera and edited in a graphics program). The boot up process halts when the F8 key is used, i. e., you can then peruse the list at your
leisure; when you hit the Enter key after you've made your selection, the boot up process continues as usual.
IF you don't hit the F8 key, the system simply boots up as usual to the first boot drive priority HD listed in BIOS. And of course you can change
the boot drive priority listing in BIOS; that's a pretty simple chore using the arrow keys and the Enter key since you don't have a mouse at that
point (at least NOT in either of my PCs; I haven't seen an "up to date" mobo in years and it wouldn't surprise me if some mobo manufacturer has
figured out how to incorporate a mouse during POST). As "Plan B", the first listed HD [as well as all the others] probably has something to do with
the configuration of the HDs on the mobo, i. e., which one is plugged in where. IMO that's more trouble than it's worth learning about that since,
via trial and error and swapping the cables around, you would eventually figure it out.
IMO the single biggest drawback of the F8 key is that you have to be paying attention and to remember to do that (if you don't want the "default"
boot up HD). I seem to vaguely recall that if a dual boot setup is created, a screen shows up, and it lists the various HDs available, and it waits
until you make a choice----IF anyone who reads this has an active dual boot setup, would you please clarify just exactly what you see.
By the way, since none of my HDs have more than one partition on them, I have absolutely no idea what would happen if you did happen to have more than
one partition (a scenario of each partition having an installed OS on it), i. e., at the level of a complete guess, I don't imagine that any HD with
multiple partitions on it would be "visible" in the F8 key list view. *IF* that's the case, I have zero idea, when you boot up such a HD, how you
would access any of the OS partitions. In a lesser of evils approach re the work involved, my system of just one OS per HD, avoids the
"complication" of having to learn from scratch how to access a HD with multiple partitions.
Finally, as a memory aid, I made an index card size printout in Excel of the list of HDs (that you see on the image file) and annotated each HD with
what OS was on that HD. As you can see in my edit of the list, I also renamed the drive letter local disk on each HD to verbiage that was more
informative as to what the HD 'was about' (to avoid confusing myself as to what's what).
|| posted on 26-12-2016 at 22:02
Well you're NOT going to believe this, but such in life in the digital world.
On my primary computer, I have to use F8 to get the list of the installed HDs. On my secondary computer (different CPU, mobo, etc.,), I can use F11
*BUT*: this secondary computer was in for repair years ago in a small local computer shop. During the repair, the tech installed something that
changed the boot up screen to something that is totally different, interface wise, from my secondary PC and laptop. It works just fine, and I really
don't know if he changed the master boot record, or what; I of course didn't realize that he had done this until I got it home, and booted up; since
his modification worked, I let it ride.
But now on this computer, when I hit F11, it gives me the list, but ignores the selection that I've made. I can solve the problem by going into BIOS
and manually changing the hard drive boot choice, and that works; it's just so much more convenient using the method that I have available to me on
my other machine, but I can live with it.
|| posted on 23-12-2016 at 11:58
|When I looked at this last (and it was a couple of years back), the procedure was,
Install windoze first (starting with the oldest windoze that you need) and then Linux.
You can install Linux to another drive but THIS IS THE CAVEAT. Linux creates a boot sector on the Windoze drive to boot a linux menu (G.R.U.B.) which
is the boot loader for the different Operating systems. Should you decide to do away with Linux you then have to deal with the bootloader on the
Windoze drive. Typically a re-partition, format and re-load.
Katzy's solution in many ways is simpler, but, in others, more complex.
1. Create your Windoze drive
2. Unplug it
3. Connect your Linux drive
4. Install Linux
5. Re-connect your Windoze drive and
6. Press F11 to select your boot drive.
FWIW Linux can usually read NTFS partitions now, but you may need to install an NTFS boot loader from the canonical programs list.
There is also a linux partition mounter for windoze too, so that you can access Linux partitions with file manager.
|| posted on 22-12-2016 at 20:47
|I did that, for a while. Just plugged the drive in and used F11 to select the boot drive.
If the Windoze drive is NTFS, the Linux drive might not see it. That might be out of date, now. But, it sure couldn't way back when I did it.
Don't leave a Linux drive connected, when you install Windoze, though, coz it'll trample all over it.
|| posted on 22-12-2016 at 20:38
|Question: Adding A Linux Hard Drive To A PC That Has A Windows OS HD
This is really a question of whether or not I have anything to lose by trying this scheme out, i. e., whether there is ANY possibility that I will
irreversibly ruin the Windows OS HD.
My scheme is straightforward, but the Google hits all seem to be about partitioning the existing Win OS HD (to install the Linux distro).
So I have a run of the mill XP OS HD [32 bit] that works, and a run of the mill Linux distro on another HD (Mageia-64 bit] that also is up and
running. I would like to hook (as in chain) both of them up.
I have zero idea if that's a sound idea, and even less of an idea if I would automatically get a dual boot setup choice upon bootup [without my,
before the fact, intervening with some sort of a program/whatever to create that, i. e., I want a screen that asks me which one I want [Note: being
able to boot up one, and then being able to switch over to the other (without rebooting) is totally unimportant, as is to have file sharing
I, VERY VERY vaguely, seem to recall back in the day that if you did this with different Win OSs, that wasn't a bona fide dual boot, and it would
'superficially' APPEAR to work, and you would corrupt the files that you created.